Subaru Key Fob Battery

    Looking for an expert locksmith near you?

    If you’re looking for a Locksmith in Mississauga or any of its neighboring cities, you need an expert you can count on. We are a locally owned professional locksmith company with years of experience.

    CALL FOR AN ESTIMATE: ☎️ (647) 694-4164

    Or, fill out the following form and we will contact you as soon as possible.




    Scroll down to read the rest of this article titled Subaru Key Fob Battery.

    How to Change the Battery in Your Subaru Key Fob

    If you are the owner of a Subaru, then you know that the key fob is an important part of the car. Not only does it allow you to start the engine, but it also provides security for your vehicle. If your key fob battery dies, then you will not be able to start your car or access it in any way. In this article, we will teach you how to change the battery in your Subaru key fob!

    The first thing that you need to do is locate the battery cover. On most key fobs, this will be on the back side of the device. Once you have found the cover, use a small screwdriver or a coin to pry it open. Be careful not to damage the cover, as you will need to put it back on later.

    Once the cover is off, you should see the battery inside. It is important to note the orientation of the battery, as you will need to put the new one in the same way. Using a small pair of pliers, carefully remove the old battery and dispose of it properly.

    Now it is time to install the new battery. Take the new battery and insert it into the key fob, making sure that it is in the same orientation as the old one. Once the new battery is in place, replace the cover and screw it back on.

    That’s all there is to it!

    What battery does a Subaru key fob use?

    Subaru key fobs use CR2032 batteries. These batteries are easy to find and relatively inexpensive, so you should have no problem replacing your key fob battery. Thanks for reading and we hope this article was helpful! feel free to contact us if you have any other questions about your Subaru.

    Can I change the battery in my Subaru key fob?

    Yes, you can change the battery in your Subaru key fob. The process is relatively simple and only takes a few minutes. All you need is a small screwdriver or coin and a pair of pliers. Be sure to dispose of the old battery properly!

    How do you change the battery in a 2019 Subaru key fob?

    The process for changing the battery in a 2019 Subaru key fob is the same as for any other year. Locate the battery cover on the back of the device and use a small screwdriver or coin to pry it open. Remove the old battery and insert the new one, making sure that it is in the same orientation. Replace the cover and screw it back on. That’s all there is to it!

    What is equivalent to CR1620 battery?

    A CR1620 battery is equivalent to a DL1620 battery. They are both lithium batteries and have the same dimensions. If you are looking for a replacement battery, either of these will work.

    What battery goes in a 2009 Subaru key fob?

    The battery that goes in a 2009 Subaru key fob is a CR1620 battery. This is a lithium battery and can be replaced relatively easily. You can find CR1620 batteries at most stores, or you can order them online.

    Rate this post

    Related Articles

    Contact Us
    COVID-19 NOTICE:
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar